Skip to content

Sketchbook / case study · see it on its sheet

Hybrid ATR 72-600

A student-team design study re-engineering a regional airliner around hydrogen fuel cells and batteries.

Dates
Jun–Jul 2025
Event
ICAM summer programme, Toulouse
Team
team of 4: me, Dennyson, Gopika Sree, Pavithra
My part
Hydrogen technology: fuel-cell design, hydrogen storage, safety systems
Stack
PEM fuel cells · Battery energy budgeting · Systems integration
Verified
3,258.1 kWh(student estimate) mission energy22,500 kg(student estimate) team's takeoff-weight target3 h 05 min(student estimate) mission flight time
Result
student design study

The question

Could a regional turboprop, the ATR 72-600, fly on hydrogen fuel cells plus batteries while staying within the team's design target of 22,500 kg(student estimate) at takeoff?

The design (student-team study)

A PEM fuel-cell stack carries the sustained cruise; a battery pack supplies peak power for takeoff and climb; two electric motors drive the propellers; liquid hydrogen sits in a cryogenic tank. The team's mission energy budget comes to 3,258.1 kWh(student estimate) for a flight of 3 h 05 min(student estimate), cruising at 510 km/h at 25,000 ft(student estimate).

Honest notes

  • This was a four-week student design study during the ICAM summer programme in Toulouse, not an aircraft programme, and nothing here is certified.
  • The numbers are shown exactly as the team published them. One row doesn't add up (the descent energy) and is marked on the energy profile.

My part

Team McQuade: Dennyson (project lead, systems integration), Gopika Sree (propulsion), Pavithra (energy systems) and me. I was the hydrogen technology engineer: fuel-cell design, hydrogen storage and safety systems.

Mission energy profile (student-team estimate)

Student-team design estimate · ICAM summer programme 2025

Team McQuade: Dennyson, Gopika Sree, Pavithra, Solaimuthu

Flight time
3 h 05 min
Cruise
510 km/h at 25,000 ft
Takeoff weight
22,500 kg team’s design target

Drag, use the arrow keys, or pick a phase.

2,500 kW

phase power · Takeoff

Phase 1 of 5

Takeoff

Duration
5 min
Power
2,500 kW
Energy, as published
208.3 kWh
Cumulative
208.3 kWh of 3,258.1 kWh

Check: 2,500 kW × 5 min = 208.3 kWh, matches the table to its 0.1 kWh rounding.

Cumulative energy, filling toward the published total

Through Takeoff: 208.3 kWh (+208.3 kWh this phase)

Published total 3,258.1 kWh

Team’s stated source · Takeoff

“batteries for high-power phases (takeoff)”

Team McQuade’s project site, “Key Innovation”. Quoted, not computed: this sheet does not split power between sources.

The team's architecture: H₂ storage feeds a PEM fuel-cell stack, which with a battery pack (peak power support) feeds power electronics and two electric motors. Highlighted: the battery pack, named in the team's statement for takeoff.H₂ storagePEM fuel-cellstackpower electronicsbattery packpeak power supportnamed for takeofftwo electric motors
The team’s architecture, redrawn with generic part names.

Takeoff, phase 1 of 5: 2,500 kW for 5 min, 208.3 kWh; cumulative 208.3 of 3,258.1 kWh. Team's stated source: "batteries for high-power phases (takeoff)".

Simulation using recorded numbers from the team's published mission energy table (hybrid-atr-revival)
Show the numbers as a table
Team McQuade’s published mission energy table, with cumulative energy, a power × time check and the team’s stated source
PhaseDurationPowerEnergy (published)CumulativePower × timeTeam’s stated source
Takeoff5 min2,500 kW208.3 kWh208.3 kWh208.3 kWh, matchesbatteries for high-power phases (takeoff)
Climb10 min2,000 kW333.3 kWh541.6 kWh333.3 kWh, matchesnot stated
Cruise2.5 h1,000 kW2,500 kWh3,041.6 kWh2,500 kWh, matchesfuel cells for sustained cruise operations
Descent20 min500 kW166.5 kWh3,208.1 kWh166.7 kWh, RE-CHECK (table says 166.5)not stated
Reservenot listednot listed50 kWh3,258.1 kWhnot applicablenot stated
Published total3 h 05 min3,258.1 kWh3,258.1 kWh